FAST RELIABLE DELIVERY
BUY NOW, PAY LATER
HASSLE FREE 30 DAY RETURNS
PHONE ORDERS 0333 242 3233

Get 5% OFF this product with code VICDEC. Hurry, offer ends soon.

Victron Energy Smart Battery Protect 12/24-220A - BPR122022000

£82.36 RRP £111.19 (25.93 % )

Prices incl. VAT. Delivery information

In stock - Ready for dispatch

 - "Delivered on time, kept me updated on progress. Price was competitive."

£82.36 Victron Energy Smart Battery Protect 12/24-220A - BPR122022000
Apple PayMasterCardPayPalStripeVISA
  • 69472
  • 0,80 kg

Why buy from us

  • Hassle-free Returns within 30 Days
  • Next Working Day delivery available*
  • Need expert advice? Call 0333 242 3233
Victron Energy - Smart Battery Protect 12/24-220A - BPR122022000 The Smart BatteryProtect...more

Victron Energy - Smart Battery Protect 12/24-220A - BPR122022000

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled. The Smart BatteryProtect is not designed for reverse currents from charging sources.

Protects the battery against excessive discharge and can be used as a system on/off switch

The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

The on/off input can be used as a system on/off switch.

12/24V auto ranging

The Smart BatteryProtect automatically detects system voltage one time only.

Bluetooth: programming made easy

When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.

Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).

If required, Bluetooth can be disabled.

A special setting for Li-ion batteries

In this mode the BatteryProtect can be controlled by the VE.Bus BMS

Ultra-low current consumption

This is important in case of Li-ion batteries, especially after low voltage shutdown.

Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection

To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16.3V respectively 32.6V.

Ignition proof

No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output

The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect

The load will be disconnected 90 seconds after the battery voltage drops below the preset level. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.

The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Brand: Victron Energy
Voltage: 12/24V
Dimensions: H62 x W123 x D120mm
IP (Ingress Protection) rating: : Electronics: IP67 (potted), Connections: IP00
Operating voltage range: : 6 –35V
Current Continuous: 200A
Current Peak: 600A
Warranty: 5 Years
Downloads "Victron Energy Smart Battery Protect 12/24-220A - BPR122022000"
Read, write and discuss reviews...more
Customer evaluation for "Victron Energy Smart Battery Protect 12/24-220A - BPR122022000"
Write an evaluation
(Maximum number of files:3, Maximum file size (in MB):32, Allowed file extensions:jpg,png)
No files selected
Please enter these characters in the following text field.

The fields marked with * are required.

Recently Viewed