FAST RELIABLE DELIVERY
BUY NOW, PAY LATER
HASSLE FREE 30 DAY RETURNS
PHONE ORDERS 0333 242 3233

Phoenix Smart IP43 Charger 12/50(1+1) 230V - PSC125051085

£332.73 RRP £476.71 (30.2 % )

Prices incl. VAT. Delivery information

In stock - Ready for dispatch

 - "Delivered on time, kept me updated on progress. Price was competitive."

£332.73 Phoenix Smart IP43 Charger 12/50(1+1) 230V - PSC125051085
Apple PayMasterCardPayPalStripeVISA
  • 69281
  • 3,70 kg

Why buy from us

  • Hassle-free Returns within 30 Days
  • Next Working Day delivery available*
  • Need expert advice? Call 0333 242 3233
Victron Phoenix Smart IP43 Charger 12/50 (1+1) 230V (PSC125051085) With boat owners in mind...more

Victron Phoenix Smart IP43 Charger 12/50 (1+1) 230V (PSC125051085)

With boat owners in mind this adaptive 5-step charger can provide 50A of charge. The Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features.

Victron Phoenix Smart IP43 Charger 12/50 (1+1) 230V with boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the Phoenix 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below. For voltage and temperature compensated charging order a wireless Smart Battery Sense.

Features of the Phoenix Smart IP43 Charger 12/50 (1+1) 230V

Bluetooth Smart enabled

Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.

Phoenix Smart (1+1): two outputs to charge 2 battery banks

The second output, limited to approximately 3A and with a slightly lower output voltage, is intended to top up a starter battery.

Automatic voltage compensation

The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases. Please see the manual for details.

Adaptive 5-stage charge algorithm: bulk – absorption – recondition – float – storage

The Phoenix Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used.

The right amount of charge: variable absorption time

When only shallow discharges occur (a yacht connected to shore power for example) the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the battery will be fully charged.

Preventing damage due to excessive gassing: the BatterySafe mode (see fig. 2)

If, in order to quickly charge a battery, a high charge current in combination with a high absorption voltage has been chosen, the charger will prevent damage due to excessive gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached (see the charge curve between 14,4 V and 15,0 V in fig. 2).

Less maintenance and aging when the battery is not in use: the Storage Mode (see fig. 1 & 2)

The Storage Mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the Storage Mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries

Charger on-off control can be implemented by connecting a relay or open collector optocoupler output from a Li-ion BMS to the remote on-off port. Alternatively full control of voltage and current can be achieved with Bluetooth.

Fully programmable charge algorithm

The charge algorithm can be programmed with help of Bluetooth or the VE.Direct interface. Three preprogrammed algorithms can be selected with the mode button (see specifications).

Remote on-off

The remote on/off consists of two terminals: Remote H and Remote L. A remote on/off switch or relay contact can be connected between H and L. Alternatively, terminal H can be pulled high, or terminal L can be pulled low. See manual for details.

VE.Direct interface

For a wired data connection to a Colour Control panel, PC or other devices. Please see the VictronConnect app under Downloads / Software on our website.

Programmable relay

Can be programmed using the VE.Direct interface or a Bluetooth enabled device to trip on an alarm or other events.

Downloads "Phoenix Smart IP43 Charger 12/50(1+1) 230V - PSC125051085"
Read, write and discuss reviews...more
Customer evaluation for "Phoenix Smart IP43 Charger 12/50(1+1) 230V - PSC125051085"
Write an evaluation
(Maximum number of files:3, Maximum file size (in MB):32, Allowed file extensions:jpg,png)
No files selected
Please enter these characters in the following text field.

The fields marked with * are required.

Sold out
Ecoflow Relay Module 30A Ecoflow Relay Module 30A
£30.82 RRP £41.61
Popular
Sold out
Popular
Sold out
Popular
Recently Viewed